Sensaphone Enlarge View
Sensaphone
Alternative Views
  • sensaphone panel
  • Sensaphone
 
  • sensaphone panel
  • Sensaphone


Sensaphone 400 Frost Alarm System

Remote frost & security alarm alerts you to weather events or equipment failures that can result in crop loss Read More

 
Quantity Item Name Item Number Price
Sensaphone 400 Frost Alarm System 3420A $425.00
 
The following items are required for the product to function properly. They are sold separately.
Quantity Item Name Item Number Price
Remote Temp Sensor for Sensaphone 3421 $33.00
Product Features

Sensaphone Alarm and Dialer

Remote frost & security alarm alerts you to weather events or equipment failures that can result in crop loss

  • Monitor up to 4 sensors
  • Calls up to four pre-programmed numbers to alert you to unsafe conditions
  • Call in to check current conditions or listen to on-site sounds
  • Powered by 110V Adapter (included) or on six C batteries (not included)
  • Sensors are not included, please order separately (Item 3421)
Specifications

 

Alert Zones
Number of Zones: 4 (thermistor installed on zone #1 for local
temperature monitoring)
Zone Connector: terminal block
Zone Types: N.O./N.C. contact, 2.8K thermistor ( -20° F to
150° F or -30° C to 65° C )
Zone Characteristics: 5.11K to 2.85V (Short circuit current:
1mA max.)
A/D Converter Resolution: 10 bits ±2 LSB
Zone Protection: 5.5VDC Metal Oxide Varistor with fast acting
diode clamps.
Microphone
Internal Electret Condenser: For listening in to on-site sounds
and detecting high sound levels.
Phone Interface
Line RJ11 Jack: For connection to a two-wire analog telephone
line. (6’ modular cord included)
Extension RJ11 Jack w/ Line Seizure: For connecting other
devices on the same telephone line, devices connected to this jack
are disconnected in the event that the 400 must dial out for an
alarm.
Phone Line Protection: Metal Oxide Varistor & self-resetting
fuse
LED Indicator
System On: On steady when the unit is in RUN mode. LED
blinks once every few seconds while in STANDBY mode.
Phone In Use: On steady when the telephone line is being used.
LED blinks when no dial tone is detected. Off when telephone
line is not in use.
Alarm: Off when no alarm exists. Blinks when an
unacknowleged alarm exists. On steady when an acknowledged
alarm exists
Battery Ok: On steady when the battery is in good condition.
Blinks when the battery is low. Off when the battery must be
replaced.
Relay Output
Rated for 1A 30VAC/1A 30VDC maximum.
Power Supply
Power Supply: 120VAC/9VDC 60Hz 6W wall plug-in
transformer w/6’ cord.
Power Consumption: 1.5 Watts
Power Protection: Metal Oxide Varistor
Battery Backup: Six size-C alkaline batteries (not included),
providing up to 24 hours of back-up time.
Environmental
Operating Temperature: 32–122° F (0–50° C)
Operating Humidity: 0–90% RH non-condensing
Storage Temperature: 32°–140° F (0–60° C)
Physical
Dimensions: 2.1”h x 7.8”w x 8.8”d
Weight: 2 lbs.
Enclosure: Indoor-rated plastic housing suitable for wall or
desktop installation.
Alarm: Off when no alarm exists. Blinks when an
unacknowleged alarm exists. On steady when an acknowledged
alarm exists
Battery Ok: On steady when the battery is in good condition.
Blinks when the battery is low. Off when the battery must be
replaced.


 

Manuals / Literature

Find all of our Product Manuals and literature in our Documents Library

Document_Library_Button3

 

 

Related Items

 

© Spectrum Technologies, Inc. All Rights Reserved. www.specmeters.com

Spectrum Technologies, 12360 S. Industrial Drive E., Plainfield, IL 60585, Phone - 800-248-8873