HomeAbout SpecmetersCatalog RequestOrdering InfoContact Us
Weather StationsData LoggersSpecWare SoftwareDegree Day RecordersNutrient ManagementChlorophyll MetersPlant HealthLight ManagementRain ManagementpH and EC MetersSoil MoistureSoil CompactionWeather InstrumentationSupport LibraryProduct ManualsEmail NewsletterVideosShows and EventsDistributors

FieldScout TDR 300 Soil Moisture Meter


Click on the thumbnail to view larger image
Item #
Description
6430FS
TDR 300 Soil Moisture Meter (rods not included)
2950CV5
GPS/DGPS Cable
7250
GPS Unit Mounting Bracket
3661USB
USB-to-Serial Adapter
6430CASE
TDR 300 Carrying Case
6430PH
Pilot Hole Maker for TDR Meters
6428FS
Two 1.5in(3.8cm) Rods
6429FS
Two 3in(7.5cm) Rods
6431FS
Two 4.8in(12cm) Rods
6432FS
Two 8in(20cm) Rods

Manual
You may also be interested in...

Bookmark and Share

 

Manage water responsibly and reduce operating expenses

When precision irrigation decisions count, the FieldScout TDR Series offers growers a tool to eliminate the guesswork. Based on proven time-domain measurement technology, these portable units accurately measure soil moisture across the full range of soil moisture conditions. Select from the 1.5***, 3, 4.8 or 8-inch (3.8***, 7.5, 12 or 20-cm) probe rods to suit your desired depth measurement. Install PVC access tubes and take readings deeper in the soil profile for permanent crops like apple, grapes, and nut crops.

The TDR 300 has two volumetric water content modes; one for standard soils and one for higher clay soils. In volumetric water content (VWC) mode, the meter converts a measured electrical signal into percent soil moisture content using an equation valid over a wide range of mineral soils. In irrigation mode, the meter displays a relative water content (RWC) on a scale of 0 to 100 corresponding to a user-defined upper and lower soil moisture reference level. Water deficit, the amount of water needed to bring the soil moisture content up to the upper reference level, is also calculated and displayed. The reference levels are easily programmed into the meter with the accompanying software. Create up to 2 management sites based on your soil types and crop needs. Use the raw reading mode (measurement period in microseconds) to do soil-specific calibrations.

Perfect for Researchers and Consultants! An internal data logger and RS-232 port allow for use with a DGPS for geo-referenced soil moisture measurements. Includes software and PC cable*.

Use the powerful SpecMaps online application to discover the value of spatially variable sensor measurements. Mapping software requires GPS**; not included.

RODS ARE SOLD SEPARATELY. For more information on the TDR Rods.

* Spectrum’s PC cables connect to a 9-pin serial port. USB-Serial adapter (item 3661USB) required for connection to computers with only USB ports. ** GPS interface requires two cables. The GPS/DGPS cable (item 2950CV5) is available from Spectrum. A PC serial interface cable supplied by the manufacturer of the GPS receiver is also required. *** 1.5" (3.8 cm) rods may require a TDR 300 firmware update. Please contact us for instructions.

 

 

More Information
Click here for our new Irrigation Audit brochure - Highlights the benefits of the TDR 300 and SpecMaps
Click here to view the water holding capacity by soil type comparison chart


Top of the page / Purchase information

 


Copyright © 2010 Spectrum Technologies, Inc. All Rights Reserved.
12360 South Industrial Dr. East - Plainfield, Illinois 60585
Telephone: +1-815-436-4440    Fax: +1-815-436-4460